User Manual

Editing a Tone
Initializing a Tone
Here’s how you can initialize the settings of the current tone.
1. Press the [EDIT] button.
The TONE EDIT screen will appear.
2. Press the [MENU] button.
3. Choose “TONE INIT” and press the [ENTER] button.
A message will ask “Are you sure?”
4. To initialize, choose “OK” and press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the initialization has been completed, press the [MENU]
button to return to the previous screen.
Initializing a Partial
Here’s how to initialize the partials of a SuperNATURAL Synth Tone,
SuperNATURAL Drum Kit, PCM Synth Tone, or PCM Drum Kit.
1. Press the [EDIT] button.
The TONE EDIT screen will appear.
2. Press the [MENU] button.
3. Choose “PARTIAL INIT” and press the [ENTER] button.
4. Select the partial that you want to initialize.
5. To initialize, choose “OK” and press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
When the initialization has been completed, press the [MENU]
button to return to the previous screen.
Copying a Partial
Here’s how to copy the partial settings of a SuperNATURAL Synth
Tone, SuperNATURAL Drum Kit, PCM Synth Tone, or PCM Drum Kit.
1. Press the [EDIT] button.
The TONE EDIT screen will appear.
2. Press the [MENU] button.
3. Choose “PARTIAL COPY” and press the [ENTER] button.
4. Select the copy-source partial and the copy-destination
partial.
5. To execute, choose “OK” and press the [ENTER] button.
Selecting the Partial to Edit
Here’s how to select the partials of a SuperNATURAL Synth Tone,
SuperNATURAL Drum Kit, PCM Synth Tone, or PCM Drum Kit.
1. Press the [EDIT] button.
The TONE EDIT screen will appear.
2. Press the [MENU] button.
3. Choose “PARTIAL SELECT” and press the [ENTER] button.
4. Select the partial that you want to edit.
5. Turn the value dial or use [DEC] [INC] buttons to switch
the partial/wave you’re editing on/o.
* For a SuperNATURAL drum kit, only one partial can be selected.
* You can’t switch all partials o.
42