User Manual

Using the INTEGRA-7 with Your Computer

USB Driver

Here’s how to switch between the dedicated INTEGRA-7 USB driver

and the generic driver provided by the operating system.

If you want to use USB audio, you’ll need to use the VENDER driver.

1. In the MENU screen, choose “SYSTEM” and press the

[ENTER] button.

2. Choose “SETUP” tab and press the [ENTER] button.

3. Specify the USB Driver that you want to use.

When you change this setting, a conrmation message will appear.

Driver Explanation

VENDER

(MIDI+AUDIO)

The dedicated INTEGRA-7 driver provided by Roland will

be used. MIDI and audio will be available.

GENERIC

(MIDI only)

The generic driver provided by the operating system

will be used. Only MIDI will be available.

MEMO

This setting will take eect after you’ve carried out a System

Write, and you’ve turned the unit o, then back on again.

4. Choose “WRITE” and press the [ENTER] button to save the

setting.

5. Turn the unit o, then on again.

Connecting the INTEGRA-7 to Your

Computer

1. Install the USB driver on your computer.

If you want to use the INTEGRA-7’s USB audio functionality, change

the USB Driver setting to VENDER and then install the driver. You

can download the driver from the Roland website.

Roland website

http://www.roland.com/support/en/

The procedure for installing the driver will dier depending on your

system. Before you proceed, you should carefully read the “Readme”

le that was extracted along with the installer.

2. Use a USB cable (sold separately) to connect the

INTEGRA-7 to your computer.