User Manual

Using the INTEGRA-7 with Your Computer
Introduction Playing/Creating Sounds Use with a Computer Overall Settings Appendix
Quick Guide
USB MIDI
If you connect your computer and MIDI keyboard to the INTEGRA-7 as shown in the illustration and turn the USB-MIDI Thru ON, you’ll be able to use
the INTEGRA-7 as a MIDI interface.
This is convenient when you want to use a MIDI keyboard with DAW software on your computer to create song data.
For details about settings on your computer, refer to the owner’s manual of the software you’re using.
Computer
INTEGRA-7
Rear Panel
MIDI OUT
MIDI IN
MIDI Keyboard
If you want to play the sound generator of the INTEGRA-7 directly from your MIDI keyboard, turn the USB-MIDI Thru OFF.
MIDI Signal Flow
Sound
Generator
Section
USB INMIDI IN USB OUTMIDI OUT
USB-MIDI Thru=OFF
INTEGRA-7
Sound
Generator
Section
USB INMIDI IN USB OUTMIDI OUT
USB-MIDI Thru=ON
INTEGRA-7
Specifying the Output Destination of the Incoming Messages
Here’s how to specify whether the MIDI messages received at MIDI IN will be retransmitted without change to computer (the “ON” setting), or will not
be transmitted (the “OFF” setting).
1. Press the [MENU] button.
2. Choose “SYSTEM” and press the [ENTER] button.
3. In the “MIDI” tab, choose “USB-MIDI Thru” and specify the ON/OFF setting.
4. Hold down the [SHIFT] button and press the [EDIT] button to save the setting.
45