User Manual
Convenient Functions
Marking Multiple Items of Data
You can select multiple consecutive items of sound data, and set or
clear their marks in a single operation.
1. In the screen where you’re selecting sound data, select
the lowest-numbered item of sound data that you want
to select.
2. Hold down the [SHIFT] button and use the cursor
[ ] [ ] buttons to select the highest-numbered item of
sound data that you want to select.
All sounds between the numbers you selected in steps 1 and 2 will
be selected.
The number of currently selected data items is shown in the upper
right of the screen.
3. Press the [INC] button.
Pressing the [DEC] button will clear the mark from the sound data.
Deleting an Exported File
In the screen where you select the data le to be imported, you can
delete data les.
1. In the UTILITY screen, choose “IMPORT” and press the
[ENTER] button.
The IMPORT screen will appear.
2. Select the data le that you want to delete.
NOTE
Data that you delete cannot be recovered.
Take care not to inadvertently delete important data.
3. Press the [MENU] button.
4. Choose “DELETE” and press the [ENTER] button.
A message will ask “Are you sure?”
5. Choose “OK” and press the [ENTER] button.
Renaming an Exported File
In the screen where you select the data le to be imported, you can
rename the data le.
1. In the UTILITY screen, choose “IMPORT” and press the
[ENTER] button.
The IMPORT screen will appear.
2. Select the data le that you want to rename.
3. Press the [MENU] button.
4. Choose “RENAME” and press the [ENTER] button.
For details on assigning a name, refer to “Assigning a Name” (p. 29).
5. Press the [ENTER] button.
Backing Up User Data
You can back up all of settings in the INTEGRA-7 to a USB ash drive
(sold separately), or restore those settings into the INTEGRA-7’s
memory.
* Connect your USB ash drive to the USB MEMORY port before
you back up or restore data.
NOTE
• If you execute the backup operation using a le name that
already exists, the backup data currently saved on the USB ash
drive will be overwritten. If you want to keep multiple backup
les within a single USB ash drive, you can either back them
up with dierent le names, or back them up as described in
“Backing Up USB Flash Drive Data to a Computer” (p. 53).
• Never insert or remove a USB ash drive while this unit is on.
Doing so may corrupt the unit’s data or the data on the USB
ash drive.
• Carefully insert the USB ash drive all the way in-until it is rmly
in place.
• Use USB ash drive available from Roland. Proper operation
cannot be guaranteed if other USB device is used.
Backing Up to a USB Flash Drive
(BACKUP)
1. In the UTILITY screen, choose “BACKUP” and press the
[ENTER] button.
2. Assign a name to the backup le.
For details on assigning a name, refer to “Assigning a Name” (p. 29).
3. Press the [ENTER] button.
A message will ask “Are you sure?”
4. To execute, choose “OK” and press the [ENTER] button.
NOTE
Never turn o the unit while the backup operation is in progress.
52