User Manual

Convenient Functions
Restoring Backed-up Data from a
Computer to a USB Flash Drive
1. Connect the USB ash drive to your computer, and open
the USB ash drive.
2. Copy (drag and drop) the entire backed-up “ROLAND”
folder from your computer into the USB ash drive.
NOTE
• When you copy the backed-up data to the USB ash drive, the
“ROLAND” folder that previously existed on the USB ash drive
will be overwritten, and its data will be lost.
• You must copy the entire “ROLAND” folder. The system will not
operate correctly if you copy only some of the les from the
“ROLAND” folder.
3. Disconnect the USB ash drive from your computer as
described in step 5 of “Backing Up USB Flash Drive Data to
a Computer” (p. 53).
Transmitting the Temporary Area’s Data
to an External MIDI Device (BULK DUMP)
Here’s how to transmit the studio set and tone settings to an
external MIDI device. This operation is called “bulk dump.” You can
use this operation when you want to connect another INTEGRA-7
unit and play it using identical settings, or when you want to save
your studio set and tone settings on an external MIDI device as a
precaution against data loss.
Connect the INTEGRA-7 to your external MIDI device as shown in
the illustration before you proceed.
Computer
INTEGRA-7
Sequencer
software such
as SONAR
1. In the UTILITY screen, choose “BULK DUMP” and press the
[ENTER] button.
A message will ask “Are you sure?”
2. To execute the bulk dump, choose “OK” and press the
[ENTER] button.
54