User Manual

Error Message List
If an incorrect operation is performed, or if processing could not be performed as you specied, an error message will appear.
Refer to the explanation for the error message that appears, and take the appropriate action.
Message Meaning Action
Cannot Import! Sound data cannot be imported.
An import destination has not been selected. Select the import destination
(p. 51).
File Not Selected! No le is selected. Select a le.
Incorrect File Name! The le name is invalid.
Do not use a le name that starts with “.” or contains a character that may not
be used (¥ / ; * ? “ < > |) in a le name.
MIDI Buer Full!
An unusually large amount of MIDI data was received, and could not
be processed.
Reduce the amount of MIDI messages that are being transmitted.
MIDI Oine! The MIDI IN connection was broken.
Check that there is no problem with the MIDI cable connected to the
INTEGRA-7’s MIDI IN, and that the MIDI cable was not disconnected.
Permission Denied!
The operation could not be performed because the read-only attribute
is set for the folder or le.
Use your computer to clear the read-only attribute of the le or folder.
Program Error!
The INTEGRA-7 was unable to start up.
The program could not be read correctly. Alternatively, the system
update program may be invalid.
Use the correct program to perform the update once again.
If this does not solve the problem, contact your dealer or customer support.
Read Error!
Data could not be read from the USB ash drive.
Make sure that USB ash drive is correctly connected (p. 5).
Also make sure that you’re using a USB ash drive sold by Roland.
The le is damaged. Do not use this le.
System Memory
Damaged!
The contents of system memory may be damaged.
Execute the factory reset operation (p. 55).
If this does not solve the problem, contact your dealer or customer support.
USB Memory Full! There is insucient space on the USB ash drive. Delete unneeded data (p. 52, p. 53).
USB Memory Not
Ready!
The USB ash drive is not inserted, or is inserted incompletely.
Turn o the unit, rmly insert the USB ash drive, and then turn on the unit
once again (p. 5, p. 21).
The USB ash drive was removed after you selected data that was on
the USB ash drive.
The format of the USB ash drive is invalid. Use the INTEGRA-7 to format the USB ash drive (p. 50).
Write Error!
Data could not be written to the USB ash drive.
Make sure that USB ash drive is correctly connected (p. 5).
Also make sure that you’re using a USB ash drive sold by Roland.
The format of the USB ash drive is invalid. Use the INTEGRA-7 to format the USB ash drive (p. 50).
58