Owner`s manual

200
MIDI Implementation
4. Data transmission (Sequencer section)
■1 Recorded messages are transmitted during
playback.
■2 If the Through parameter is ON, messages
received (except for System Common messages
and System Realtime messages) will be
transmitted.
■3 Messages that are generated and transmitted
■3.1 Messages automatically generated by the
system
■Channel Mode messages
●Omni Off (Controller number 124)
status 2nd byte 3rd byte
BnH 7CH 00H
* At start-up, this message is transmitted to all channels.
●Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
* At start-up, this message is transmitted to all channels.
●3.2 Messages generated and transmitted when the
Sync Out is ON
■System Common messages
●Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00H–7F 7FH (0–16383)
■System Realtime messages
●Timing Clock
status
F8H
●Start
status
FAH
●Continue
status
FBH
●Stop
status
FCH