Owner`s manual

47
Chapter 4 Setting Effects
Chapter4
Selecting the Multi-Effects Type
Procedure
1. Press the [PTN] button.
The screen for playing patterns appears.
2. Press the [F2 (STUP] button.
3. Press the [F4 (M-FX)] button.
The screen for selecting the types of Multi-effects
appears.
4. Use the [VALUE] dial or the [INC/DEC] buttons to select
the type of Multi-effects.
5. Upon selection, press the [EXIT] button to return to the
screen for playing the patterns.
Available Settings:
No M-FX TYPE Description
1 4BAND EQ modify the tone
2
SPECTRUM
add character to the sound
3
ENHANCER
add sparkle to the sound
4
OVERDRIVE
distort the sound mildly
5
DISTORTION
distort the sound severely
6 LO-FI simulate a “low-fidelity” sound
7 NOISE add various types of noise
8 RADIO
TUNING
simulate a radio being tuned
9 PHONO-
GRAPH
simulate an old record
10 COMPRES-
SOR
make the volume level more con-
sistent
11 LIMITER smooth out irregularities in volume
12 SLICER apply successive cuts to the sound
13 TREMOLO cyclic changes in volume
14 PHASER modulate the sound
15 CHORUS add spaciousness and depthto the
sound
16 SPACE-D add transparent depth
17 TETRA
CHORUS
layer chorus sounds to add spa-
ciousness
18 FLANGER add metallic resonance to the
sound
19 STEP
FLANGER
add metallic resonance to the
sound while changing the pitch in
steps
20 SHORT
DELAY
add echoes to the sound
21 AUTO PAN automatically move the stereo
location
22 FB PITCH
SHIFTER
skew the pitch
23 REVERB add reverberation
24 GATE
REVERB
sharply cut the reverberation
25 ISOLATOR Cuts off a specific range