Owner`s manual

78
Chapter 5 Creating Your Own Patterns and
To do so, move the cursor to “NOTE RANGE” by pressing
the [CURSOR (down)] button before entering the range using
the [VALUE] dial or the [INC/DEC] buttons.
* ***
Available Settings:
FROM: F1–the last measure number
FOR: 1–ALL (ALL ... All measures)
STATUS:
- ALL All musical data
- NOTE Note
- PC Program Change
- CC Control Change
- BEND Pitch Bend
- P-AFT Polyphonic Aftertouch
- C-AFT Channel Aftertouch
- SYS-EX System Exclusive
- TEMPO Tempo (BPM)
- MUTE Mute
Deleting Unwanted Measures
(Delete Measure)
This operation deletes unwanted measures from a pattern, and
moves any subsequent measures toward the beginning to close the
gap. If, in a part, the deleted measures are followed by data, the
musical data of that part will be shortened. If all parts were specified
for the delete operation, the pattern itself will become shorter.
Procedure
Select the pattern for which Delete is to be executed.
1. Press the [PTN] button.
2. Using the [VALUE] dial or the [INC/DEC] buttons,
select the pattern on which Delete is to be executed.
Invoke the screen for executing Delete.
3. Press the [F3 (EDIT)] button.
4. Press the [F2 (TRACK EDIT)] button.
The screen for selecting Pattern Edit appears.
5. Press the [CURSOR (left, right)] button to invoke the
screen displaying “DELETE.”
6. Press the [F3 (DEL)] button.
The screen for editing Delete appears.
7. Select the part to be edited using the relevant PART
button, [R], [1] to [7] or [RHYTHM PART VIEW].
* By pressing the [RHYTHM PART VIEW] button you can
specify the MUTE CTRL PART.
8. Move the cursor to “FROM” by pressing the [CURSOR]
buttons, and then select the measure at the beginning of
the portion of the pattern to be deleted using the
[VALUE] dial or the [INC/DEC] buttons.
9. Move the cursor to “FOR” by pressing the [CURSOR]
buttons, and then specify the number of measures to be
deleted from the beginning of the portion of the pattern
using the [VALUE] dial or the [INC/DEC] buttons.
Now, execute delete.
10.Press the [F4 (OK)] button.
A screen asking you whether or not you want to execute
delete appears.
11.Press the [F4 (EXEC)] button.
Delete is executed and, upon completion, the normal
display reappears.
Available Settings:
FROM: 1–32 (Maximum)
FOR: 1–32 (Maximum), ALL