Owner`s manual

93
Chapter 6 Making Original Patches
Chapter6
- PKG (Peaking Filter)
As this value is increased, the frequency area that is
emphasized will rise. As this value is decreased, the
frequency area that is emphasized will fall.
FILTER: CUTOFF KF
(CUTOFF FREQUENCY KEY FOLLOW)
This setting causes the cutoff frequency to be affected by the
keyboard pad position.
With positive (+) settings, the cutoff frequency will also rise
as you play higher notes. With negative (-) settings, the cutoff
frequency will become lower as you play higher notes.
Range: -100– +200
- +100: When you move 12 notes upward from C4 on the
keyboard, the cutoff frequency will rise one octave.
- +200: When you move 12 notes upward from C4 on the
keyboard, the cutoff frequency will rise two octaves.
- 0: The cutoff frequency will be the same for all notes.
- 100: When you move 12 notes upward from C4 on the
keyboard, the cutoff frequency will fall one octave.
If you set Cutoff Frequency to a value of approximately “64,”
the key follow effect will be easy to hear.
FILTER: RESONANCE
This setting emphasizes the overtones in the region of the
cutoff frequency, adding character to the sound.
Range: 0–127
As this value is increased, the sound will have more
character. As this value is decreased, the sound will be more
natural.
In order to prevent the resonance from being increased
excessively, factory settings have been made so that the value
will not rise beyond “115” even if the [RESONANCE] knob is
rotated all the way to the right. This is called the Resonance
Limiter. You are free to adjust this upper limit.
-> “Specifying the Variable Range of Resonance
(Resonance Limiter)” (P. 115)
FILTER: RES VELO SENS (RESONANCE VELOCITY
SENSE)
Specifies how resonance depth will be affected by your
playing dynamics on the external MIDI keyboard.
With positive (+) settings, playing the keyboard more
strongly will cause the change to be greater. With negative (-)
settings, playing the keyboard more strongly will cause the
change to be less.
Range: -100– +150
Level
Frequency
CUTOFF=0 CUTOFF=64 CUTOFF=127
When operating FILTER, be careful not to set
RESONANCE too high. Excessively high values may cause
sounds to be distorted or the volume level to become
unexpectedly high.
Some settings may damage your hearing, or your speakers.
Please use caution.
C4C3C2C1 C5 C6 C7
0
+50
+100
+200
-50
-100
o
-1
-2
+1
+2
Cutoff Frequency
(Octave)
Key
LPF
BPF
HPF
PKG
Level
Frequency
RESONANCE=0 RESONANCE=64 RESONANCE=127
If you have increased the Resonance Limiter setting, be
careful not to raise the resonance excessively. Excessively
high values may cause sounds to be distorted or the volume
level to become unexpectedly high.
Some settings may damage your hearing, or your speakers.
Please use caution.