Owner`s manual

Applying EFX/Specifying the
Output Destination for Each Part
(Part EFX/Output Assign)
For each part, you can turn EFX on/off, and specify
the output jack from which the sound will be output.
1. Press [MIXER SELECT] several times to make
the EFX/OUT indicator light.
2. Use part sliders [R]Ð[7] to adjust the Part
EFX Balance for each part.
Available Settings:
DRY (D): EFX will not be applied, and the sound
will be output from the MIX jacks in
stereo.
EFX (E): EFX will be applied, and the sound will be
output from the MIX jacks in stereo.
DIR1 (1): The sound will be output in stereo from
the DIRECT 1 jacks.
DIR2 (2): The sound will be output in stereo from
the DIRECT 2 jacks.
RHY (R): The sound will be output according to the
settings of the Rhythm Tone EFX/Output
Assign, the Rhythm Tone Reverb Level,
and the Rhythm Tone Delay Level parame-
ters of the selected rhythm set (only for the
Rhythm Part).
☞ ÒR.TONE EFX/Out (Rhythm Tone EFX/
Output Assign)Ó (p. 76)
By moving the slider normally you can select ÒDRYÓ
or ÒEFX.Ó
By holding down [SHIFT] and moving the slider, you
can select ÒDRYÐDIR2 (RHY).Ó
fig.4-65
If you press [TEMPO/MIXER] to select the Part Mixer
display, the values of each part will be displayed
graphically.
* The reverb/delay/EFX effects will not apply to the sound
that is output from the DIRECT 1/2 jacks.
* If the EFX Output Level setting is low, the sound of the
patch/rhythm set to which EFX is applied will not be
heard (p. 86).
fig.4-66TEXT
If you wish to apply EFX or adjust the reverb/delay
volume for individual rhythm tones, or to output only
a specific rhythm tone from the DIR1/2 jacks, select
ÒRHY.Ó
¥To adjust the reverb volume for individual
rhythm tones...
☞ ÒR.TONE Rev Level (Rhythm Tone Reverb
Level)Ó (p. 76)
¥To adjust the delay volume for individual
rhythm tones...
☞ ÒR.TONE Dly Level (Rhythm Tone Delay
Level)Ó (p. 76)
¥To turn EFX on/off and specify the output des-
tination for individual rhythm tones...
☞ ÒR.TONE EFX/Out (Rhythm Tone EFX/Output
Assign)Ó (p. 76)
PART
EFX
EFX OUTPUT LEVEL
EFX
DIR1
DIR2
DRY
PART
EFX
DIR1
DIR2
RHY
DRY
For each rhythm tone
(RHY)
For each part
Volume of EFX sound
for all parts
EFX
sound
Entire rhythm part
(DRY, EFX, DIR1, DIR2)
Dry sound
/MIXER
TEMPO
Part
Current Part
DIR2DRY EFX DIR1RHY
REVERB
DELAY
EFX/OUT
KEY SHIFT
PAN
LEVEL
MEGAMIX
EFX
DRY
(EFX ON)
(EFX OFF)
EFX
DIR1
DIR2
RHY
DRY
EFX
DIR1
DIR2
DRY
SHIFT SHIFT
Chapter 4. Applying Effects to the Sound (Effects)
104
4