Owner`s manual

Saving the Phrases You
Assigned (RPS Set Write)
When you have assigned phrases to create an RPS set
that you like, hereÕs how to save it as a User RPS Set.
1. Make sure that the pattern is stopped.
2. Press [RPS SET] to access the RPS Set Select
page.
When you modify the contents of an RPS set, an aster-
isk Ò*Ó will appear at the left of the number, indicating
that the selected RPS set has been modified (edited).
Be aware that if you turn off the power without saving
the modified RPS set, the previous settings will reappear.
3. Press [WRITE].
The following display will appear, and a cursor Ò_Ó
will appear below the number.
fig.6-10
If you do not wish to change the number or name, you
may skip steps 4Ð8.
If you decide not to save the pattern, press [EXIT].
4. Select the save destination bank.
When saving an RPS set, only the user bank can be
selected.
5. Use [INC] [DEC] or the [VALUE] dial to select
the save destination number.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
At this time, you can press [UNDO/REDO] to check
the name of the RPS set that is currently in the save
destination number. After you have found an RPS set
that you do not mind overwriting, press
[UNDO/REDO] once again to return to the previous
display.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
6. Press PAGE [>].
The cursor will move to the beginning of the second
line of the display.
fig.6-11
7. Assign a name to the RPS set.
Use [INC] [DEC] or the [VALUE] dial to specify the
characters.
The following characters can be selected.
space, AÐZ, aÐz, 0Ð9, ! Ò # $ % & Ô ( ) * + , - ./: ; < = > ?
@ [ ´ ] ^ _ ` { | }
8. Repeat steps 6Ð7 to input the name.
By pressing PAGE [<] you can move the cursor back
counterclockwise.
9. Press [ENTER].
The execute display will appear.
If you wish to cancel the operation, press [EXIT].
fig.6-12
10. Press [ENTER] once again.
fig.6-13 (2-36)
The RPS Set Write operation will be executed, and the
normal display will reappear.
The RPS set has now been saved.
WRITE
INITIALIZE
Chapter 6. Using the Keyboard Pads to Play Phrases (RPS)
112
6