Owner`s manual

02:Modulation-S
(Modulation Single)
The DBeam Controller will have the same function as
the modulation lever of an external MIDI keyboard.
Hand movement will apply modulation to the current
part.
As your hand comes closer to the controller, the effect
will be deeper.
If your hand is outside of the effective range, the effect
will be Ò0Ó regardless of the location of your hand.
* The effect that is applied when the modulation lever is
operated will depend on the patch.
☞ ÒSpecifying the Parameters That Will Be
Modified by Each Controller (Control)Ó (p. 59)
03:Pitch Bend-A (Pitch Bend All)
The DBeam Controller will have the same function as
the pitch bend lever of an external MIDI keyboard.
Hand movement will apply pitch bend to all parts.
As your hand comes closer to the controller, the pitch
will rise.
If your hand is outside of the effective range, the effect
will be Ò0Ó regardless of the location of your hand.
* The effect that is applied when the pitch bend lever is
operated will depend on the patch.
☞ ÒSpecifying the Parameters That Will Be
Modified by Each Controller (Control)Ó (p. 59)
04:Pitch Bend-S
(Pitch Bend Single)
The DBeam Controller will have the same function as
the pitch bend lever of an external MIDI keyboard.
Hand movement will apply pitch bend to the current
part.
As your hand comes closer to the controller, the pitch
will rise.
If your hand is outside of the effective range, the effect
will be Ò0Ó regardless of the location of your hand.
* The effect that is applied when the pitch bend lever is
operated will depend on the patch.
☞ ÒSpecifying the Parameters That Will Be
Modified by Each Controller (Control)Ó (p. 59)
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
When you select a type 05Ð10, be careful not to raise
Low Boost excessively, since the sound will be prone
to cracking or distorting. It is also best to turn
[OCTAVE] off.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
05:Cut+Reso1-A
(Cutoff + Resonance 1 All)
Hand movement will modify the cutoff and resonance
of all parts.
As your hand comes closer to the controller, the cutoff
and resonance values will increase.
If your hand is outside of the effective range, the cutoff
and resonance values will be Ò0Ó regardless of the
location of your hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
* The resonance value will not increase beyond the value
specified by the Resonance Limiter.
☞ ÒSpecifying the Variable Range of Resonance
(Resonance Limiter)Ó (p. 164)
06:Cut+Reso1-S
(Cutoff + Resonance 1 Single)
Hand movement will modify the cutoff and resonance
of the current part.
As your hand comes closer to the controller, the cutoff
and resonance values will increase.
If your hand is outside of the effective range, the cutoff
and resonance values will be Ò0Ó regardless of the
location of your hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
* The resonance value will not increase beyond the value
specified by the Resonance Limiter.
☞ ÒSpecifying the Variable Range of Resonance
(Resonance Limiter)Ó (p. 164)
07:Cut+Reso2-A
(Cutoff + Resonance 2 All)
Hand movement will modify the cutoff and resonance
of all parts.
As your hand comes closer to the controller, the cutoff
value will decrease, and the resonance value will
increase.
If your hand is outside of the effective range, the cutoff
value will be Ò127Ó and the resonance value will be
Ò0,Ó regardless of the location of your hand.
Chapter 9. Using the DBeam Controller to Apply Various Effects
122
9