Owner`s manual

12:Part Pan-S (Part Pan Single)
Hand movement will modify the pan of the current
part.
As your hand comes closer to the controller the pan
will move toward the right, and as your hand is taken
away from the controller the pan will move toward
the left.
If your hand leaves the effective range, the part pan
value will be Ò0Ó regardless of the location of your
hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
13:Cross Pan
Hand movement will modify the pan settings of the
various parts by exchanging them.
If your hand leaves the effective range, the part pan
value will be Ò0Ó regardless of the location of your
hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
14:Cros Drm Pan
(Cross Drum Pan)
Hand movement will exchange the pan settings of the
rhythm part and of the other parts.
If your hand leaves the effective range, the part pan
value will be Ò0Ó regardless of the location of your
hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
15:Key Shift-A (Key Shift All)
Hand movement will modify the Part Key Shift set-
tings of all parts.
As your hand comes closer to the controller, the Part
Key Shift value will increase.
If your hand is outside of the effective range, the Part
Key Shift value will be Ò0Ó regardless of the location of
your hand.
16:Key Shift-S (Key Shift Single)
Hand movement will modify the Part Key Shift set-
tings of the current part.
As your hand comes closer to the controller, the Part
Key Shift value will increase.
If your hand is outside of the effective range, the Part
Key Shift value will be Ò0Ó regardless of the location of
your hand.
17:Reverb Level
Hand movement will modify the Part Reverb Level of
all parts.
As your hand comes closer to the controller, the Part
Reverb Level will increase.
If your hand leaves the effective range, the Part Reverb
Level value will be Ò0Ó regardless of the location of
your hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
18:Delay Level
Hand movement will modify the Part Delay Level of
all parts.
As your hand comes closer to the controller, the Part
Delay Level will increase.
If your hand leaves the effective range, the Part Delay
Level value will be Ò0Ó regardless of the location of
your hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
19:EFX Ctrl1 (EFX Control 1)
Hand movement will modify the parameter that is
assigned to the [CTRL1] knob of the currently selected
EFX.
If your hand leaves the effective range, the parameter
value will be Ò0Ó regardless of the location of your
hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
Chapter 9. Using the DBeam Controller to Apply Various Effects
124
9