Owner`s manual

20:EFX Ctrl2 (EFX Control 2)
Hand movement will modify the parameter that is
assigned to the [CTRL2] knob of the currently selected
EFX.
If your hand leaves the effective range, the parameter
value will be Ò0Ó regardless of the location of your
hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
21:EFX Ctrl3 (EFX Control 3)
Hand movement will modify the parameter that is
assigned to the [CTRL3] knob of the currently selected
EFX.
If your hand leaves the effective range, the parameter
value will be Ò0Ó regardless of the location of your
hand.
* If you wish to restore the pattern to its original state, use
[INC] [DEC] or the [VALUE] dial to re-select the same
pattern. The next time that the pattern repeats, it will
return to its original settings.
22:Start/Stop
The DBeam Controller will have the same function as
[PLAY]/ [STOP].
If the pattern is playing, it will stop when you place
your hand over the controller, and will start when you
remove your hand.
23:All Mute
When you place your hand over the controller, all
parts will be muted.
When your hand leaves the effective range, the origi-
nal mute settings will be restored.
24:Turntable
When you place your hand over the controller, the
tempo and pitch of all parts will drop simultaneously,
creating an effect similar to when a record turntable is
stopped.
The closer your hand approaches the controller, the
more the tempo and pitch will drop. It is effective to
slowly lower your hand toward the controller.
If your hand leaves the effective range, the original
tempo and pitch (Part Key Shift of Ò0Ó) will return.
25:Arp Range (Arpeggio Range)
Shading the controller with your hand will modify the
Octave Range of the arpeggiator. Use this when you
are playing the arpeggiator.
As your hand approaches the controller, the Octave
Range will increase.
If your hand leaves the effective range, the Octave
Range value will be Ò0.Ó
26:Note+Bnd (Note + Pitch Bend)
Shading the controller with your hand will sound the
patch of the current part, and Pitch Bend will be
applied at the same time. This is suitable for use when
a sustain-type patch (such as P:A054) is selected.
As your hand approaches the controller, the pitch will
rise.
If your hand leaves the effective range, the sound will
stop.
The pitch of the note that will sound is shown at the
right of the Type name. By holding down D BEAM
CONTROLLER [ON] and pressing a keyboard pad,
you can change the note that will sound.
fig.9-3
The range of pitch change can be specified by
the Bend Range for each patch.
☞ ÒAdjusting the Range of Pitch Bend (Bend
Range)Ó (p. 60)
27:Adlib1 (Ad-Lib 1)
Shading the controller with your hand will sound the
patch of the current part using notes of a specified key
and scale.
As your hand approaches the controller, higher notes
will sound.
The key and scale will be displayed as an abbreviation
at the right of the Type name.
You can change the key by pressing a keyboard pad
while you hold down the D BEAM CONTROLLER
[ON] button.
You can change the scale by pressing PAGE [<] [>]
while you hold down the D BEAM CONTROLLER
[ON] button.
fig.9-4
Chapter 9. Using the DBeam Controller to Apply Various Effects
125
9