Owner`s manual

One of the following 21 types of scale can be selected.
CHR: Chromatic Scale
TCH: TcherepninÕs Scale
SPN: Spanish Scale
BLS: Blues Mixolydian Scale
CD: Combination of Diminished Scale
MAJ: Diatonic Majar Scale
MIN: Natural Minor Scale
HMJ: Harmonic Majer Scale
HMI: Harmonic minor Scale
DH : Double Harmonic Scale
MMI: Melodic Miner Scale
GPS: Gypsy Scale
DOM: Dominant Scale
WT: Whole Tone Scale
HBL: Hexatonic Blue Scale
AUG: Augmented Scale
RKY: Ryukyu Scale
ISD: In Sen Scale, Decending
ISA: In Sen Scale, Ascending
PMJ: Majar Pentatonic Scale
PMI: Minor Pentatonic Scale
28:Adlib2 (Ad-Lib 2)
Shading the controller with your hand will sound the
patch of the current part using notes of a specified key
and scale. This lets you perform ad-lib in a narrower
range than Ad-lib 1.
As your hand approaches the controller, higher notes
will sound.
The key and scale will be displayed as an abbreviation
at the right of the Type name.
You can change the key by pressing a keyboard pad
while you hold down the D BEAM CONTROLLER
[ON] button.
You can change the scale by pressing PAGE [<] [>]
while you hold down the D BEAM CONTROLLER
[ON] button.
The pitch range will rise or fall depending on the
Octave Range setting.
The scales that can be selected are the same as for Ad-
lib 1.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
About the MIDI messages transmitted from
the DBeam controller
The destination of the MIDI messages transmitted
from the DBeam controller is determined by the Local
Tx switch setting of each part.
☞ ÒDisconnecting the Keyboard Pads from the
Internal Sound Generator (Local Tx Switch)Ó
(p. 169)
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Chapter 9. Using the DBeam Controller to Apply Various Effects
126
9