Owner`s manual

3. When you are finished recording, press
[STOP].
Erasing Unwanted Data While
You Record (Real-Time Erase)
Real-Time Erase is a function that lets you erase only
the unwanted data that you specify a certain key or
range of keys during real-time recording.
In particular, this is convenient when you are record-
ing the rhythm part, since you can erase a specific
rhythm tone.
1. During recording, press [REALTIME ERASE].
You will enter Real-Time Erase mode, and the follow-
ing display will appear.
fig.10-22
2. Use [INC] [DEC] or the [VALUE] dial to select
the type of data that you wish to erase.
Range:
ALL: All musical data in the recording part
will be erased.
NOTE: Notes in the specified range will be
erased.
PC: Program changes will be erased.
CC: All control changes will be erased.
BEND: Pitch bend will be erased.
P-AFT: Polyphonic aftertouch will be erased.
C-AFT: Channel aftertouch will be erased.
SYS-EX: System exclusive data messages will
be erased.
TEMPO: Tempo data will be erased.
MUTE: Mute data will be erased.
CC#0ÐCC#127: Control changes of the selected con-
troller number will be erased.
For knob and part mixer settings, you can also operate
the corresponding front panel knob to select that data
(control change) for erasure.
The following knobs and part mixer settings can be
selected.
fig.10-23
[COARSE TUNE]
[FINE TUNE]
[CUTOFF]
[RESONANCE]
[TONE LEVEL]
[TONE PAN]
[P-ENV DEPTH]
[P-ENV A]
[P-ENV D]
[P-ENV S]
[P-ENV R]
[F-ENV DEPTH]
[F-ENV A]
[F-ENV D]
[F-ENV S]
[F-ENV R]
[A-ENV A]
[A-ENV D]
[A-ENV S]
[A-ENV R]
[LFO1 P-DEPTH]
[LFO1 F-DEPTH]
[LFO1 A-DEPTH]
[LFO1 RATE]
[TIME]
[PART LEVEL]
[PART PAN]
[PART KEY SHIFT]
[PART REVERB]
[PART DELAY]
[PART EFX/OUT]
3. Press [REC] to erase the unwanted data.
The specified data will be erased while you press the
button.
When ÒSYS-EX,Ó ÒTEMPOÓ or ÒMUTEÓ are selected,
the data will be erased from the [MUTE CTRL] part
regardless of the recording part.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you select ÒNOTEÓ as the data to be erased, you can
press the keyboard pad to erase only the specified note
messages. Notes will be erased while you press the
keyboard pad.
If you wish to erase notes of a specific range, press
keyboard pads to indicate the top and bottom of the
range. The range can also be specified from an external
MIDI keyboard.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
4. When you have finished, press [EXIT] or
[REALTIME ERASE] to return to normal
recording mode.
CUTOFF
REALTIME ERASE
EDIT
Chapter 10. Recording Patterns
132
0