Owner`s manual

Deleting Musical Data
(Delete Event)
1. In the Microscope display, rotate the
[VALUE] dial to select the musical data that
you wish to delete.
2. Press [EDIT].
The confirmation page will appear.
fig.10-73
3. Press [ENTER].
The musical data will be deleted.
Inserting Musical Data
(Insert Event)
1. In the Microscope display, rotate the
[VALUE] dial to move to the position where
you wish to insert musical data.
2. Press [WRITE].
The Insert Event page will appear, and the following
display will appear.
fig.10-74
3. Use [INC] [DEC] or the [VALUE] dial to select
the type of musical data that will be insert-
ed.
Range:
When you are viewing a part RÐ7 in the Microscope
NOTE: Note
PC: Program change
CC: Control change
BEND: Pitch bend
P-AFT: Polyphonic aftertouch
C-AFT: Channel aftertouch
When you are viewing a MUTE CTRL part in the
Microscope
SYS-EX: System exclusive
TEMPO: Tempo
MUTE: Mute
4. Press [ENTER].
A message with basic settings for the selected type of
musical data will appear.
fig.10-75
5. Press PAGE [<] [>] to move the cursor to the
location that you wish to modify.
6. Use [INC] [DEC] or the [VALUE] dial to modi-
fy the value.
7. Press [ENTER] to finalize the settings.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you select ÒSys ExÓ (System Exclusive), the follow-
ing message will appear. In the same way as for the
Change Event operation, use the keyboard pads and
[ENTER] to successively enter hexadecimal data.
fig.10-76
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Using the keyboard pads and knobs
to directly insert musical data
By holding down [WRITE] and pressing a keyboard
pad, you can insert a Note message of a note name
corresponding to the keyboard pad that you pressed.
(Values are fixed at Velocity = 112, Gate Time = 24.)
By holding down the [WRITE] and operating a patch
parameter knob, you can access the parameter of the
knob that you operated.
While you hold down the button, the display will indi-
cate the parameter that is being operated.
fig.10-77
Moving Musical Data
(Move Event)
1. In the Microscope page, rotate the [VALUE]
dial to access the musical data that you
wish to move.
2. Hold down [SHIFT] and [EDIT], and rotate
the [VALUE] dial to move the data.
While you hold down the buttons, the display will
indicate the position to which the data is being moved.
fig.10-78
WRITE
WRITE
CUTOFF
WRITE
EDIT
Chapter 10. Recording Patterns
143
10