Owner`s manual

Transposing the Pitch
(Transpose)
This operation shifts the note numbers (pitch) of the
data recorded in a pattern. You can specify a transpo-
sition of up to +/-2 octaves.
* It is not possible to specify the range of measures that will
be transposed.
fig.11-23TEXT
1. Select the pattern that you wish to trans-
pose.
2. Hold down [EDIT] and press keyboard pad
[5].
The display will show the Transpose setting page.
fig.11-24
3. Select the part that you wish to transpose.
* You can select more than one part.
4. Specify the amount of transposition, in
semitone steps.
Range: -24Ð+24
* If the setting value is Ò0,Ó no transposition will occur.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you wish to transpose only a specific range of notes,
press the keyboard pad to specify the desired range. If
you do not specify the note range, all notes will be
transposed.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
5. Press [ENTER].
The confirmation screen will appear in the display.
fig.11-25
6. Press [ENTER] once again.
The Transpose operation will be carried out, and the
normal display will reappear.
Modifying the Strength of
Notes (Change Velocity)
This operation modifies the velocity (playing strength)
of the notes recorded in the pattern. Increasing the
velocity values will cause the notes to be played more
strongly. This operation can be used to increase or
decrease the overall keyboard playing dynamics.
* If this operation would result in a velocity greater than
127 (or less than 1), the result will be limited to 127 (or 1).
* It is not possible to specify the range of measures in which
velocity will be modified.
fig.11-26TEXT
1. Select the pattern in which you wish to
modify the velocity.
2. Hold down [EDIT] and press keyboard pad
[6].
The display will show the Change Velocity setting page.
3. Select the part whose velocity you wish to
change.
* You may select more than one part.
4. Specify the amount that will be added to
(or subtracted from) the velocity.
Range: -99Ð+99
If this value is Ò0,Ó the velocity will not be modified.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you wish to modify the velocity of a specific range
of notes, use the keyboard pads to specify the range. If
you do not specify the note range, the velocity of all
notes will be modified.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
5. Press [ENTER].
The confirmation screen will appear in the display.
REALTIME ERASE
EDIT
6
100 90
100
80
110 100
110
90
85 75
85
65
Reduce velocity
values by 15
Increase velocity
values by 10
REALTIME ERASE
EDIT
5
Transpose four semitones upward (+4)
Chapter 11. Editing Patterns (Pattern Edit)
150
1