Owner`s manual

6. Press [ENTER].
The following display will appear.
fig.14-14 (2-36)
7. After a time, the following display will
appear, so repeat steps 3Ð6.
fig.14-14-1
8. When the Card Duplicate operation has
been completed, the following display will
appear.
fig.14-16
To exit the setting page, press [EXIT].
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Installing the card protector
The MC-505 provides a card protector to prevent theft
of the memory card. To install the card protector, use
the following procedure.
1. Use a screwdriver to remove both screws
that are at either side of the memory card
slot.
2. Insert the memory card into the memory
card slot.
3. Use the screws to fasten the card protector
as shown below.
fig.14-17TEXT
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Card protector
Side view
162
Chapter 14. Using Memory Cards
4