Owner`s manual

Specifying How Patches Will Be
Switched (Patch Remain)
You can specify whether or not currently sounding
notes will be turned off when another patch or rhythm
set is selected.
Range: OFF, ON
If this is on, currently sounding notes will continue.
Specifying the Number of Notes
for Each Part (Voice Reserve)
Specifies the number of notes that will be reserved for
each part when the total number of requested notes
exceeds 64.
Range: 0Ð64
Use [PART SELECT] and the PART buttons to select
the part whose settings you wish to modify.
Voice Reserve settings can be made up to a total of 64
notes for all parts.
Specifying the Variable Range of
Resonance (Resonance Limiter)
You can specify the range in which the [RESO-
NANCE] knob can be adjusted.
You can make separate settings for the rhythm part
[Reso Limit-R] and for the other parts [Reso Limit-N].
Range: 50Ð127
As this setting is increased, the variable range of the
[RESONANCE] knob will increase.
fig.15-2
Controller-Related Settings
1. Hold down [SHIFT] and press keyboard
pad [10].
The display will show the CONTROLLER section set-
ting page.
2. Use PAGE [<] [>] to select parameters with-
in the section, and use [INC] [DEC] or the
[VALUE] dial to set each parameter.
fig.15-3
To exit the setting page, press [EXIT].
Adjusting the Display Contrast
(LCD Contrast)
This adjusts the contrast (brightness) of the LCD dis-
play. Increasing this value will increase the contrast of
the display.
Range: 1Ð16
PAGE
SHIFT
10
RESONANCE
Reso Limit-R = 100
1000
164
Chapter 15. Configuration (System)
5