Owner`s manual
¥ Since there are two or more un-muted parts, the
phrase cannot be assigned to an RPS set.
☞ Decide on one part in the phrase that you wish to
register, and mute all other parts (p. 110).
fig.17-10
¥ Quantize is not selected.
☞ Press [QUANTIZE] to select the quantization that
you wish to use (p. 113).
fig.17-11
¥ Since a write protect sticker is affixed to the mem-
ory card, data cannot be saved to the card bank.
☞ Remove the write protect sticker from the memory
card (p. 159).
fig.17-12
¥ Since the pattern contains no musical data, it can-
not be played back.
fig.17-13
¥ Cannot undo.
fig.17-14
¥ The card manufacturer/model is not specified for
use with the MC-505.
☞ Use a specified card (p. 159).
¥ The card has not been formatted for the MC-505.
☞ Format the card (p. 159).
¥ It is possible that the contents of the card have
been damaged.
☞ Format the card (p. 159).
¥ The card does not contain MC-505 data.
☞ Use a card that contains MC-505 data.
fig.17-15
¥ No card is inserted.
☞ Turn off the power, and insert a card (p. 159).
fig.17-15-1
¥ Since the copy destination card contains a defec-
tive block, the Card Duplicate operation cannot be
carried out.
☞ The memory card has reached the end of its lifes-
pan. Please purchase a new memory card.
fig.17-16
¥ It is possible that the contents of internal memory
have been damaged.
☞ Try executing the Factory Preset operation (Quick
Start, p. 5). If this does not resolve the problem, con-
tact a nearby Roland service center.
189