Owner`s manual

Model: MC-505(Groove Box)
Date: Oct. 30 1997
Version: 1.00
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Symbol Description Range
n MIDI Channel 0HÐFH (ch.1Ðch.16)
vv Control value 00HÐ7FH (0Ð127)
kk Note Number 00HÐ7FH (0Ð127)
xx ON/OFF 00HÐ3FH (0Ð63:OFF), 40HÐ7FH (64Ð127:ON)
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
1. MIDI messages used by the sound
source section
Channel voice messages
Note Off
status 2nd byte 3rd byte
8nH kkH vvH
9nH kkH 00H
* Not received when the Rx SW paramete is OFF.
* Not received by the Rhythm Part when the Envelope Mode parameter is NO-SUS.
Note On
status 2nd byte 3rd byte
9nH kkH vvH
* Not received when the Rx SW paramete is OFF.
Polyphonic Aftertouch
status 2nd byte 3rd byte
AnH kkH vvH
* Not received when the Rx SW parameter is OFF.
Control Change
* Not received when the Rx SW parameter is OFF.
Bank Select (Controller number 0,32)
status 2nd byte 3rd byte
BnH 00H mmH
BnH 20H llH
mm,ll=Bank number: 00 00HÐ7F 7FH (bank.1Ðbank.16384)
* Not received when the Rx Program Change or Rx Bank Select parameter is OFF.
* The Patches corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
——————+—————+————————————+————————————————————————————————————————
81 | 0 | 1 - 128 | Preset-A 001 - 128
81 | 1 | 1 - 128 | Preset-B 001 - 128
81 | 2 | 1 - 128 | Preset-C 001 - 128
81 | 3 | 1 - 128 | Preset-D 001 - 128
85 | 0 | 1 - 128 | User-A 001 - 128
85 | 1 | 1 - 128 | User-B 001 - 128
86 | 0 | 1 - 128 | Card-A 001 - 128
86 | 1 | 1 - 128 | Card-B 001 - 128
86 | 2 | 1 - 128 | Card-C 001 - 128
86 | 3 | 1 - 128 | Card-D 001 - 128
* The Rhythm set corresponding to each Bank Select are as follows.
Bank Select | Program No | Group Patch No.
MSB | LSB | |
——————+—————+————————————+————————————————————————————————————————
81 | 0 | 1 - 26 | Preset 01 - 26
85 | 0 | 1 - 20 | User 01 - 20
86 | 0 | 1 - 20 | Card 01 - 20
Modulation (Controller number 1)
status 2nd byte 3rd byte
BnH 01H vvH
Breath type (Controller number 2)
status 2nd byte 3rd byte
BnH 02H vvH
Foot type (Controller number 4)
status 2nd byte 3rd byte
BnH 04H vvH
Portamento Time (Controller number 5)
status 2nd byte 3rd byte
BnH 05H vvH
* The Portamento Time parameter will change.
Data Entry (Controller number 6,38)
status 2nd byte 3rd byte
BnH 06H mmH
BnH 26H llH
mm,ll= the value of the parameter specified by RPN mm=MSB, ll=LSB
Volume (Controller number 7)
status 2nd byte 3rd byte
BnH 07H vvH
Balance (Controller number 8)
status 2nd byte 3rd byte
BnH 08H vvH
Panpot (Controller number 10)
status 2nd byte 3rd byte
BnH 0AH vvH
* Adjust the stereo location over 128 steps, where 0 is far left, 64 is center, and 127 is far
right.
Expression (Controller number 11)
status 2nd byte 3rd byte
BnH 0BH vvH
General purpose Controller1–4 (Controller number 16–19)
status 2nd byte 3rd byte
BnH 10H-13H vvH
Hold 1 (Controller number 64)
status 2nd byte 3rd byte
BnH 40H xxH
Portamento (Controller number 65)
status 2nd byte 3rd byte
BnH 41H xxH
Sostenuto (Controller number 66)
status 2nd byte 3rd byte
BnH 42H xxH
Soft (Controller number 67)
status 2nd byte 3rd byte
BnH 43H xxH
Sound Controller1–10 (Controller number 70–79)
status 2nd byte 3rd byte
BnH 46-4FH vvH
General purpose Controller5–8 (Controller number 80–83)
status 2nd byte 3rd byte
BnH 50H-53H vvH
Portamento Control (Controller number 84)
status 2nd byte 3rd byte
BnH 54H kkH
* A Note On message received immediately after a Portamento control will be sounded
with the pitch changing smoothly from the source note number. If a voice is already
sounding at the same note number as the source note number, that voice will change
pitch to the pitch of the newly received Note On, and continue sounding (i.e., will be
played legato).
* The speed of the pitch change caused by Portamento is determined by the Portamento
Time parameter.
MIDI Implementation
234