Owner`s manual

● Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
■ System Exclusive messages
status data byte status
F0H iiH, ddH, ......, eeH F7H
F0H: System Exclusive message status
ii = ID number: This is the ID number (manufacturer ID) that specifies the manufac-
turer whose exclusive message this is. RolandÕs manufacturer ID is
41H.ID numbers 7EH and 7FH are defined in an expansion of the
MIDI standard as Universal Non-realtime messages (7EH) and
Universal Realtime Messages (7FH).
dd,..., ee = data: 00HÐ7FH (0Ð127)
F7H: EOX (End Of Exclusive)
2.2 Messages not recorded during record-
ing
■ Channel Mode messages
● Local On/Off (Controller number 122)
status 2nd byte 3rd byte
BnH 7AH 00H
vv=value: 00H,7FH (Local off, Local on)
● All Note Off (Controller number 123)
status 2nd byte 3rd byte
BnH 7BH 00H
* When an All Note Off message is received, all notes of the corresponding channel that
are on will be sent Note OffÕs, and the resulting Note Off messages will be recorded.
2.3 Messages acknowledged for synchro-
nization
■ System Common messages
● Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00HÐ7F 7FH (0Ð16383)
■ System Realtime messages
● Timing Clock
status
F8H
* This message will be received if the Sync Mode parameter is SLAVE.
● Start
status
FAH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
● Continue
status
FBH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
● Stop
status
FCH
* This message will be received if the Sync Mode parameter is SLAVE or REMOTE.
2.4 Data transmission (Sequencer section)
2.4.1 Recorded messages are transmitted
during playback.
2.4.2 If the Through parameter is ON, mes-
sages received (except for System
Common messages and System Realtime
messages) will be transmitted.
2.4.3 Messages that are generated and
transmitted
2.4.3.1 Messages automatically generated
by the system
■ Channel Mode messages
● Omni Off (Controller number 124)
status 2nd byte 3rd byte
BnH 7CH 00H
* At start-up, this message is transmitted to all channels.
● Poly (Controller number 127)
status 2nd byte 3rd byte
BnH 7FH 00H
* At start-up, this message is transmitted to all channels.
2.4.3.2 Messages generated and transmit-
ted when the Sync Out is ON
■ System Common messages
● Song Position Pointer
status 2nd byte 3rd byte
F2H mmH llH
mm,ll=value: 00 00HÐ7F 7FH (0Ð16383)
■ System Realtime messages
● Timing Clock
status
F8H
● Start
status
FAH
● Continue
status
FBH
● Stop
status
FCH
238