Owner`s manual

ManualsBrandsRoland ManualsAudio MixerMC-505

BPF (Band Pass Filter)

Rotating the knob clockwise will raise the frequency

area that is heard. Rotating the knob counterclockwise

will cause only a progressively lower frequency area

to be heard.

fig.3-25TEXT

HPF (High Pass Filter)

When the knob is turned clockwise, the low frequency

range will be cut more greatly, making the sound

sharper. As the knob is rotated toward the left, the

original sound of the waveform will be heard.

* For some waveforms, you may hear no sound if this value

is raised excessively.

fig.3-26TEXT

PKG (Peaking Filter)

When the knob is turned clockwise, the frequency area

that is emphasized will rise. Rotating the knob coun-

terclockwise will lower the frequency area that is

emphasized.

fig.3-27TEXT

Adding a Distinctive Character to

the Sound (Resonance)

This setting emphasizes the overtones in the region of

the cutoff frequency, adding character to the sound.

1. Make sure that the [FUNC] indicator is

dark.

2. Rotate the [RESONANCE] knob to adjust the

resonance setting.

fig.3-28

Range: 0Ð127

As the knob is rotated further clockwise, the sound

will take on more character. Rotating it counterclock-

wise will make the sound more natural.

fig.3-29

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

Depending on the cutoff frequency setting, raising the

resonance excessively may cause the sound to distort

suddenly. In particular when Low Boost is being

applied, the sound will be more prone to distort, so

rotate [LOW BOOST] counterclockwise to adjust the

boost amount until the sound no longer distorts.

☞ ÒUsing Low Boost to Adjust the Low RangeÓ

(Quick Start, p. 9)

In order to prevent the resonance from being increased

excessively, factory settings have been made so that

the value will not rise beyond Ò115Ó even if the [RESO-

NANCE] knob is rotated all the way to the right. This

is called the Resonance Limiter. You are free to adjust

this upper limit.

☞ ÒSpecifying the Variable Range of Resonance

(Resonance Limiter)Ó (p. 164)

If you have increased the Resonance Limiter setting,

be careful not to raise the resonance excessively.

LPF

BPF

HPF

PKG

Level

Frequency

FUNC

RESONANCE

TONE PAN

Level

Frequency

Level

Frequency

Level

Frequency

Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)