Owner`s manual

Making More Detailed Settings
1. Hold down [EDIT] and press keyboard pad
[5].
The display will show the F-ENV section setting page.
2. Use PAGE [<] [>] to select parameters with-
in the section, and edit them.
fig.3-35
ENV Depth (Filter Envelope Depth)
This is the setting page for ÒSpecifying the Depth of
the Envelope (Filter Envelope Depth)Ó (p. 43).
Velo Curve (Filter Envelope Velocity
Curve)
Select the curve of change with which the force of your
playing on the external MIDI keyboard will affect the
amount of change produced by the filter envelope.
Range: 1Ð7
fig.3-36
Velo Sens (Filter Envelope Velocity
Sensitivity)
Specifies how the force of your playing on the external
MIDI keyboard will affect the filter envelope.
Range: -100Ð+150
With positive (+) settings, the tone will change more
as you play more strongly on the keyboard. With neg-
ative (-) settings, the tone will change less as you play
more strongly on the keyboard.
* It is not possible to control this by varying the force with
which you press the keyboard pads.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
With positive (+) settings of Velocity Sensitivity, the
sound will be brighter for strongly-played notes, and
darker for softly-played notes.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
The four front panel sliders [A]/[D]/[S]/[R] can be
used to set the most commonly-used parameters of the
filter envelope, but the MC-505 also allows you to
make more detailed filter envelope settings.
fig.3-37TEXT
+
0
Time1(A) Time2
Level1 Level3(S)
Level2 Level4
Time3(D) Time4(R)
Cutoff
frequency
Time
Key on Key off
1234567
REALTIME ERASE
EDIT
5
PAGE
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
44
3