Owner`s manual

ManualsBrandsRoland ManualsAudio MixerMC-505

Adjusting the Pan for Each Tone

(Tone Pan)

This parameter sets the stereo location for each tone.

1. Press [FUNC] to make the indicator blink.

2. Rotate the [TONE PAN] knob to set the

Tone Pan value.

fig.3-39

Range: L64Ð63R

As the knob is rotated further clockwise, the stereo

location will shift toward the right. As it is rotated

counterclockwise, the location will shift toward the

left.

* The pan of the overall patch can be modified and set for

each pattern by the Setup parameter Part Pan. The Tone

Pan value will be added to this setting.

☞ ÒAdjusting the Pan of Each Part (Part Pan)Ó

(p. 24)

Causing Pan to Change

Randomly (Random Pan Switch)

This setting causes the stereo location to change ran-

domly each time a note is played.

1. Press [FUNC] to make the indicator blink.

2. Press [RND PAN].

All four indicators will be blinking, and the Random

Pan Switch will be turned on.

fig.3-40

* The Tone Pan setting will be ignored by Tones for which

the Random Pan Switch is turned on.

Making More Detailed Settings

Volume-related settings

1. Hold down [EDIT] and press keyboard pad

[6].

The display will show the AMPLIFIER/LEVEL section

setting page.

2. Use PAGE [<] [>] to select parameters with-

in the section, and edit them.

fig.3-41

Tone Level

This is the setting page for ÒAdjusting the Volume of

Each Tone (Tone Level)Ó (p. 45).

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

Bias

The Bias parameters specify how the keyboard posi-

tion will affect the Tone Level. This can be used to

simulate the way in which the volume of an acoustic

instrument changes according to the location (pitch) of

the note.

Bias Dir (Bias Direction)

Select the keyboard area(s) that will be affected above

and/or below the specified Bias Point.

Available settings:

LWR: The volume will be modified for the keyboard

area below the note specified as the Bias Point.

UPR: The volume will be modified for the keyboard

area above the note specified as the Bias Point.

L&U: The volume will be modified symmetrically

toward the left and right of the note specified

as the Bias Point.

ALL: The volume will be modified linearly from the

note specified as the Bias Point.

REALTIME ERASE

EDIT

PAGE

RND PAN

LPF

BPF

HPF

PKG

FUNC

RESONANCE

TONE PAN

FUNC

Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)