Owner`s manual

Adjusting the depth of cutoff frequen-
cy modulation (LFO1 Filter Depth)
By cyclically modulating the cutoff frequency you can
create a wah effect.
1. Make sure that the [FUNC] indicator is
dark.
2. Press [ENV SELECT] several times to select
FILTER.
3. Rotate the [DEPTH] knob to adjust the wah
depth.
fig.3-59
Adjusting the depth of volume modu-
lation (LFO1 Amplifier Depth)
By cyclically modulating the volume you can create a
tremolo effect.
1. Make sure that the [FUNC] indicator is
dark.
2. Press [ENV SELECT] several times to select
AMP.
3. Rotate the [DEPTH] knob to adjust the
tremolo depth.
fig.3-60
* The LFO2 parameters cannot be edited using [WAVE-
FORM], the [RATE] knob or the [DEPTH] knob.
Making More Detailed Settings
1. Hold down [EDIT] and press keyboard pad
[9] or [10].
The display will show the LFO1 or LFO2 section set-
ting page.
2. Use PAGE [<] [>] to select parameters with-
in the section, and edit them.
fig.3-62
Waveform (LFO1/LFO2 Waveform)
This is the setting page for ÒSelecting the Waveform
That Will Modulate the Sound (LFO1 Waveform)Ó (p.
50).
Rate (LFO1/LFO2 Rate)
This is the setting page for ÒAdjusting the Speed of
Modulation (LFO1 Rate)Ó (p. 51).
REALTIME ERASE
EDIT
9
PAGE
REALTIME ERASE
EDIT
10
FUNC
DEPTH
RATE
PITCH
FILTER
AMP
FUNC
DEPTH
RATE
PITCH
FILTER
AMP
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
52
3