Owner`s manual

Tempo Sync (LFO1/LFO2 Tempo Sync)
This parameter synchronizes the LFO modulation fre-
quency to the tempo of the pattern.
Available settings:
ON: The modulation speed will be synchronized to
the tempo, and the LFO Rate parameter can be
set in terms of a note value.
OFF: The modulation speed will be determined by
the LFO Rate setting, regardless of the tempo.
Key Sync (LFO1/LFO2 Key Sync)
This parameter synchronizes the LFO cycle to the tim-
ing at which the keyboard pads are played.
Available settings:
ON: The LFO cycle will begin when the keyboard is
played.
OFF: The same LFO waveform will be output
regardless of the timing at which the keyboard
is played.
fig.3-63TEXT
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
When Key Sync is on, the LFO waveform will begin
for each note when it is played, producing a spacious
sound with a sense of movement. When Key Sync is
off, a single LFO waveform will be applied to all notes,
producing a unified sound. When you wish to empha-
size the effect (vibrato etc.), you may want to turn this
parameter off. Also, when Tempo Sync is on, leaving
Key Sync off will allow you to synchronize precisely
to the tempo of the pattern.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Fade Mode (LFO1/LFO2 Fade Mode)
Select the way in which the LFO effect will be applied.
Available settings:
OnI (On-In): The effect will be applied gradually,
after the keyboard pad is pressed.
OnO (On-OUT): The effect will be applied immedi-
ately when the keyboard pad is
pressed, and will gradually disap-
pear.
OfI (Off-In): The effect will be applied gradually,
starting when the keyboard pad is
released.
OfO (Off-Out): The effect will be applied while the
keyboard pad remains pressed, and
will gradually disappear after it is
released.
fig.3-64TEXT
Delay Time (LFO1/LFO2 Delay Time)
Depending on the Fade Mode setting, specify the time
over which the LFO will be applied or the time over
which it will continue, etc.
Range: 0Ð127
Higher settings will produce longer times.
Fade Mode settings
OnI: Specifies the time from when the keyboard pad
is pressed until the LFO begins to be applied.
OnO: Specifies the time that the LFO will continue
after the keyboard pad is pressed.
OfI: Specifies the time from when the keyboard pad
is released until the LFO begins to be applied.
OfO: Specifies the time that the LFO will continue
after the keyboard pad is released.
Refer to the diagrams for Fade Mode.
Fade Time (LFO1/LFO2 Fade Time)
Specifies the time over which the LFO amplitude will
reach the maximum (minimum) after the Delay Time
has elapsed.
Range: 0Ð127
Higher settings will produce longer times.
Refer to the diagrams for Fade Mode.
Offset (LFO1/LFO2 Level Offset)
This parameter offsets the LFO waveform upward or
downward from the central value (pitch or cutoff fre-
quency, etc.).
Range: -63Ð+63
As this value is increased in the positive (+) direction,
the waveform will be moved upward from the central
value. As this value is increased in the negative (-)
direction, the waveform will be moved downward
from the central value.
fig.3-65
0
+
-
Delay
Time
Fade
Time
LFO
Depth
OnI OnO
OfI OfO
Delay
Time
Fade
Time
LFO
Depth
Delay
Time
Fade
Time
LFO
Depth
Delay
Time
Fade
Time
LFO
Depth
ON
OFF
Key on Key on Key on
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
53
3