Owner`s manual

* It is not possible to set the Lower value above the Upper,
or the Upper below the Lower.
Velo Range (Velocity Range Switch)
Specifies whether or not the Velocity Range settings
will be enabled. By using velocity range settings, you
can cause different tones to sound in response to notes
played at different strengths on the external MIDI key-
board.
Range: OFF, ON
When this setting is ÒON,Ó the Velocity Range settings
will be used.
* It is not possible to control this by varying the force with
which you press the keyboard pads.
Velo Range L (Velocity Range Lower)
Specifies the lower velocity limit for which the tone
will sound.
The tone will not be sounded by notes played with a
velocity lower than this setting.
Range: 1ÐUPR
Velo Range U (Velocity Range Upper)
Specifies the upper velocity limit for which the tone
will sound.
The tone will not be sounded by notes played with a
velocity stronger than this setting.
Range: LWRÐ127
fig.3-72TEXT
* It is not possible to set the Lower value above the Upper,
or the Upper below the Lower.
Velo X-Fade (Velocity Crossfade)
Specifies the way in which the volume will change
when a keyboard is played with a velocity that falls
outside the velocity range setting.
Range: 0Ð127
Higher settings will cause the volume to decrease
more gradually when the velocity falls outside of the
velocity range.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
By using Velocity Crossfade, you can use playing
dynamics on the keyboard to smoothly connect two
tones.
fig.3-73TEXT
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Smoothly Changing the Pitch
(Portamento)
In the SOLO/PORTA (Solo/Portamento) section you
can make settings for playing a patch monophonically,
or to apply a portamento effect.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Portamento
Portamento is a function that smoothly connects the
pitch of one note to the next. When the Solo switch is
on, you can apply portamento to simulate the slide
performance technique sometimes used on instru-
ments such as violin.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Turning portamento on/off
(Portamento Switch)
Turn this on when you wish to use portamento.
1. Press PORTAMENTO [ON].
The indicator will light, and portamento will be turned
on.
fig.3-74
ON
TONE1 TONE2
40 60
T1 T2
Velo Range U 40 127
30 30
060
00
Velo Range L
A-ENV
Velo Sens
Velo X-Fade
Level
Velocity
127
0
T1 T2 T3
T1 T3
T1 T2 T3
T2 T3
Velocity=115
Velocity=70
Velocity=30
T1 T2
Velo Range U 127 80
64 0
T3
127
0Velo Range L
64
80
Level
Velocity
Tones which will sound
C6C5C3C-1 F7 G9
T1
T3
T2
T4
T1 T2
Key Range U B2 B5
C-1 C3
T3
E7
C5
T4
F7
G9Key Range L
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
57
3