Owner`s manual

10. Press [ENTER] once again.
fig.3-91 (2-36)
The Patch Write operation will be carried out, then the
normal display will reappear.
The patch has now been saved.
Copying and Initializing Settings
Patch Tone Copy
This operation copies the settings of a tone in a patch
to the specified tone of the currently-selected patch.
1. Select any part 1Ð7 as the current part.
2. Press [PATCH] to access the patch select
page.
3. Select the copy destination patch.
4. Hold down [SHIFT] and press [PARAM
COPY].
The display will show the copy source patch, the copy
source tone and the copy destination tone.
fig.3-92TEXT
5. Use [INC] [DEC] or the [VALUE] dial to speci-
fy the copy source patch, the copy source
tone and the copy destination tone.
You can use PAGE [<] [>] to move the cursor.
6. Press [ENTER].
The confirmation screen will appear in the display.
fig.3-93
7. Press [ENTER] once again.
fig.3-94 (2-36)
The Patch Tone Copy operation will be carried out,
then the normal display will reappear.
If you decide to cancel the operation, press [EXIT].
If you wish to save the patch that you copied, use the
Patch Write operation.
☞ ÒSaving Patches YouÕve Created (Patch
Write)Ó (p. 61)
Patch Initialize
This operation initializes a patch.
1. Press [PATCH] to access the patch select
page.
2. Select the patch that you wish to initialize.
3. Hold down [SHIFT] and press [INITIALIZE].
The confirmation screen will appear in the display.
If you decide to cancel the operation, press [EXIT].
fig.3-95
4. Press [ENTER].
fig.3-96
The Patch Initialize operation will be carried out, then
the normal display will reappear.
SHIFT
WRITE
INITIALIZE
SHIFT
REDO
UNDO/
PARAM COPY
Copy source
patch
Copy source
tone
Copy
destination
tone
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
62
3