Owner`s manual

Creating an Original
Rhythm Set
Creating the Sounds
In Rhythm Edit, you can modify the parameters of
each rhythm tone independently.
1. Select the rhythm part as the current part.
2. Select the rhythm set that you wish to edit
(p. 23).
3. Press [TONE SELECT] to make the indicator
light.
fig.3-97
4. Press [EDIT].
The indicator will light.
The display will show the currently selected rhythm
set parameter, and the name and note number of the
rhythm tone currently being edited .
fig.3-98TEXT
5. Press a keyboard pad to select the rhythm
tone that you wish to edit.
The last-played rhythm tone will be selected for edit-
ing.
6. Select the rhythm set parameter that you
wish to modify, and edit the value.
To exit from an editing page, press [EXIT].
There are two ways to select rhythm set parameters.
Using knobs and buttons to select the
page for editing
By operating the knobs or buttons of the front panel,
you can directly call up the editing page for that para-
meter. For example, if you operate [CUTOFF] knob,
the display will automatically change to the cutoff fre-
quency setting page, and you can view the settings for
each rhythm tone as you modify them.
* This method cannot be used to edit parameters for which
there is no front panel knob or button.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Selecting only the edit page without modify-
ing the value
If you wish to see the current value before you modify
it, hold down [EDIT] while you operate the knob. This
will access the editing page without modifying the
value.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Selecting pages in each section for
editing
By pressing [EDIT] + a keyboard pad, you can access
the pages for each section, then use PAGE [<] [>] to
move between parameter screens within each section,
and edit the desired parameter. This method allows
you to edit all parameters, and is suitable when you
wish to edit a sound in a logical sequence such as
ÒwaveformÓ-> ÒpitchÓ-> Òbrightness,Ó etc.
To modify the value, use [INC] [DEC] or the [VALUE]
dial.
For how to access the pages of each section, refer to
ÒMaking More Detailed SettingsÓ in each section.
Specifying the Basic
Waveform of the Sound and
How It Will Sound (Wave)
In the WAVE section you can specify the waveform
that will be the basis of the sound, and how it will
sound.
Selecting the Basic Waveform
(Wave Select)
Select the waveform that will be the basis of each
rhythm tone.
1. Press [WAVE SELECT].
The indicator will light, and the wave select setting
page will appear.
fig.3-100TEXT
2. Use [INC] [DEC] or the [VALUE] dial to select
a Waveform Number (A001ÐA254,
B001ÐB251).
If you would like to know what waveforms are
available...
☞ ÒWaveform ListÓ (p. 190)
WAVE
SELECT
Number Waveform name
REALTIME ERASE
EDIT
Note number
Name of Rhythm tone
MUTE
RHYTHM
SELECT
TONE
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
63
3