Owner`s manual

ManualsBrandsRoland ManualsAudio MixerMC-505

Adjusting the Volume and

Pan (Amplifier)

The AMP (amplifier) section contains settings related

to the volume and stereo location of the sound.

Adjusting the Volume of Each

Rhythm Tone

(Rhythm Tone Level)

This setting adjusts the volume of each rhythm tone.

This is used mainly to adjust the volume balance

between rhythm tones.

1. Press [FUNC] to make the indicator blink.

2. Rotate the [TONE LEVEL] knob to adjust the

Rhythm Tone Level setting.

fig.3-118

Range: 0Ð127

As the knob is rotated further clockwise, the volume

will increase. As it is rotated counterclockwise, the

volume will decrease.

* The overall volume of the entire rhythm set can be modi-

fied and memorized for each pattern as the Setup parame-

ter Part Level. The Rhythm Tone Level setting will be

multiplied by this value.

☞ ÒAdjusting the Volume of Each Part (Part

Level)Ó (p. 24)

Adjusting the Pan for Each

Rhythm Tone (Rhythm Tone Pan)

This parameter sets the stereo location for each

rhythm tone.

1. Press [FUNC] to make the indicator blink.

2. Rotate the [TONE PAN] knob to set the

Rhythm Tone Pan value.

fig.3-119

Range: L64Ð63R

As the knob is rotated further clockwise, the stereo

location will shift toward the right. As it is rotated

counterclockwise, the location will shift toward the

left.

* The pan of the overall rhythm set can be modified and set

for each pattern by the Setup parameter Part Pan. The

Rhythm Tone Pan value will be added to this setting.

☞ ÒAdjusting the Pan of Each Part (Part Pan)Ó

(p. 24)

Causing Pan to Change

Randomly (Random Pan Switch)

This setting causes the stereo location to change ran-

domly each time a note is played.

1. Press [FUNC] to make the indicator blink.

2. Press [RND PAN].

fig.3-120

All four indicators will be blinking, and the Random

Pan Switch will be turned on.

* The Rhythm Tone Pan setting will be ignored by rhythm

tones for which the Random Pan Switch is turned on.

RND PAN

LPF

BPF

HPF

PKG

FUNC

RESONANCE

TONE PAN

FUNC

CUTOFF

TONE LEVEL

FUNC

Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)