Owner`s manual

Velo Sens (Amplifier Envelope Velocity
Sensitivity)
Specifies how the depth of the amplifier envelope will
be affected by the strength of your playing on the
external MIDI keyboard.
Range: -100Ð+150
With positive (+) settings, the volume will increase as
you play more strongly on the keyboard. With nega-
tive (-) settings, the volume will decrease as you play
more strongly on the keyboard.
If this is set to Ò0,Ó the volume will not be affected by
the strength of your playing on the keyboard pads.
* It is not possible to control this by varying the force with
which you press the keyboard pads.
Velo Time (Amplifier Envelope Velocity
Time Sensitivity)
Specifies how the overall times of the entire amplifier
envelope will be affected by the strength of your play-
ing on the external MIDI keyboard.
Range: -100Ð+100
With positive (+) settings, amplifier envelope times
will become faster as you play the keyboard more
strongly. With negative (-) settings, amplifier envelope
times will become slower as you play the keyboard
more strongly.
* It is not possible to control this by varying the force with
which you press the keyboard pads.
The four front panel sliders [A]/[D]/[S]/[R] can be
used to set the most commonly used parameters of the
amplifier envelope, but the MC-505 also allows you to
make more detailed amplifier envelope settings.
fig.3-125TEXT (3-51TEXT)
Time1Ð4 (Amplifier Envelope Time
1Ð4)
Specifies the time until the next level point is reached.
This can be set for each of the four parameters Time
1Ð4.
Range: 0Ð127
Higher settings will lengthen the time until the next
level point is reached.
* The front panel parameter [A] (Attack Time) corresponds
to Time1, [D] (Decay Time) to Time3, and [R] (Release
Time) to Time4.
+
0
Time1(A) Time2
Level1 Level3(S)
Level2
Time3(D) Time4(R)
Level
Time
Key on Key off
Chapter 3. Creating Original Sounds (Patch Edit/Rhythm Edit)
75
3