Owner`s manual

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Delay on/off
Hold down [EFFECT SELECT] and press [USER] to
turn delay on/off.
When delay is off, the following display will appear.
fig.4-13
This setting cannot be stored in a pattern.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Adjusting the Delay Interval
(Delay Time)
Adjusts the time from the original sound until when
the delayed sound is heard (the interval between
repeats).
1. Make sure that the [FUNC] indicator is
dark.
If it is blinking, press the button to make it go dark.
2. Press [EFFECT SELECT] several times to make
the top indicator light.
3. Rotate the [DELAY TIME] knob to set the
delay time.
fig.4-14-1
Available Settings:
SHORT: 0.1Ð275
LONG: 200Ð1000,
Rotating the knob clockwise will lengthen the time
until the delay sound is heard. Rotating the knob
counterclockwise will shorten the time until the delay
sound is heard.
When the delay type is set to ÒLONG,Ó you can hold
down [SHIFT] and rotate the [DELAY TIME] knob to
adjust the setting as a note value. The delay will syn-
chronize to the tempo of the pattern, and will sound at
intervals of the specified note value.
fig.4-15
* On the MC-505, it is not possible to set a delay time
longer than 1000 ms (1 second). When the delay time is
synchronized to the tempo, selecting a note value which
would make the delay time exceed 1000 ms will cause the
delay time to be halved, and the delay sound will be heard
at 1/2 the specified interval. In addition, even if 1/2 the
length would exceed 1000 ms, the delay time will be
shortened to 1/4 the length.
Adjusting the Number of
Repeats (Feedback Level)
Adjusts the number of times that the delay sound will
be repeated.
1. Make sure that the [FUNC] indicator is
dark.
If it is blinking, press the button to make it go dark.
2. Press [EFFECT SELECT] several times to make
the middle indicator light.
3. Rotate the [FEEDBACK] knob to set the
feedback level.
fig.4-16
Range: 0Ð+98 (%)
Rotating the knob clockwise will increase the number
of repeats. Rotating the knob counterclockwise will
decrease the number of repeats.
FUNC
DELAY
DELAY LEVEL
EFX DELAY LEVEL
FEEDBACK
DELAY TIME
DELAY
DELAY TIME
SHIFT
Delay Time =
FUNC
DELAY
DELAY LEVEL
EFX DELAY LEVEL
FEEDBACK
DELAY TIME
Chapter 4. Applying Effects to the Sound (Effects)
83
4