Owner`s manual

Adjusting the Overall Delay
Volume (Delay Level)
This adjusts the volume of the delay sound for all
eight parts (the rhythm part and parts 1Ð7).
1. Press [FUNC] to make the indicator blink.
2. Rotate the [DELAY LEVEL] knob to adjust the
delay level.
fig.4-17
Range: 0Ð127
Rotating the knob clockwise will increase the volume
of the delay sound. Rotating the knob counterclock-
wise will decrease the volume of the delay sound.
Adjusts the Delay Volume for
Each Part (Part Delay Level)
Adjusts the volume of the delay sound for each part.
1. Press [MIXER SELECT] several times to make
the DELAY indicator light.
2. Use part sliders [R]Ð[7] to set the Part
Delay Level for each part.
fig.4-18
Range: 0Ð127
Raising the slider will increase the volume of the delay
sound. Lowering it will decrease the volume of the
delay sound.
If you press [TEMPO/MIXER] to access the Part Mixer
page, the Part Delay Level of each part will be dis-
played graphically.At this time you can use [INC]
[DEC] to modify the setting values of the current part.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you wish to apply delay to parts that are not using
EFX, be aware that if either the Part Delay Level of
that part or the Delay Level of all parts is set to Ò0,Ó no
delay will be applied to that part. Also, if you set the
Part EFX/Output Assign setting of the rhythm part to
ÒRHY,Ó you will be able to adjust the delay volume for
each rhythm tone.
☞ ÒApplying EFX/Specifying the Output
Destination for Each Part (Part EFX/Output
Assign)Ó (p. 104)
¥If you wish to adjust the delay volume for
each rhythm tone...
☞ ÒR.TONE Dly Level (Rhythm Tone Delay
Level)Ó (p. 76)
fig.4-19TEXT
When the Part EFX/Output Assign setting of the
rhythm part is ÒDRYÓ or ÒEFX,Ó raising the Part Delay
Level will apply delay to all rhythm tones equally.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Applying Delay to the EFX Sound
(EFX->Delay Level)
Specifies the volume of the delay that will be applied
to the EFX sound.
Regardless of the Part Delay Level of each part, delay
will apply equally to all parts whose Part EFX/Output
Assign setting is ÒEFX.Ó
1. Make sure that the [FUNC] indicator is
dark.
If it is blinking, press the button to make it go dark.
2. Press [EFFECT SELECT] several times to make
the bottom indicator light.
3. Rotate the [EFX->DELAY LEVEL] knob to set
the EFX ->Delay Level.
fig.4-20
FUNC
DELAY
DELAY LEVEL
EFX DELAY LEVEL
FEEDBACK
DELAY TIME
PART
PART
DELAY
DELAY LEVEL
REVERB
DELAY
EFX/OUT
KEY SHIFT
PAN
LEVEL
MEGAMIX
127
0
/MIXER
TEMPO
R1234567 Current Part
FUNC
DELAY
DELAY LEVEL
EFX DELAY LEVEL
FEEDBACK
DELAY TIME
Chapter 4. Applying Effects to the Sound (Effects)
84
4