Owner`s manual

Peak1 Q (Peaking 1Q)
Specifies the width of the frequency range affected by
midrange 1.
Range: 0.5Ð8.0
As this setting is increased, the affected area will
become narrower.
fig.4-29TEXT
Peak1 Gain (Peaking 1 Gain) [CTRL 2]
Adjusts the volume of midrange 1.
Range: -15Ð+15
Peak2 Freq (Peaking 2 Frequency)
Determines the frequency of midrange 2.
Range: 200Ð8000 (Hz)
Peak2 Q (Peaking 2Q)
Specifies the width of the frequency range affected by
midrange 2.
Range: 0.5Ð8.0
As this setting is increased, the affected area will
become narrower.
Peak2 Gain (Peaking 2 Gain)
Adjusts the volume of midrange 2.
Range: -15Ð+15
Output Level [EFX OUTPUT LEVEL]
Adjusts the output level from the 4 band EQ.
Range: 0Ð127
Spectrum
(Add Character to the Sound)
This is a type of filter, which modifies the tonal charac-
ter by boosting or cutting specific frequencies. It is
similar to an equalizer, but when you wish to add
character to the sound, the Spectrum effect will pro-
duce a more distinctive result.
fig.4-30
Low-High (Low-High Gain) [CTRL 1]
Specifies the volume change at 500Hz and 8000Hz.
Range: -15Ð+15
Middle (Middle Gain) [CTRL 2]
Specifies the volume change at 1250Hz.
Range: -15Ð+15
Width (Bandwidth) [CTRL 3]
Specifies the width of the bands in which the volume
will be adjusted. (This setting applies to all bands.)
Range: 1Ð5
Output Pan
Specifies the panning of the sound that is output from
the Spectrum effect.
Range: L64Ð63R
Output Level [EFX OUTPUT LEVEL]
Specifies the volume that is output from the Spectrum
effect.
Range: 0Ð127
SPECTRUM
Low-High
Middle Gain
Width
Output Level
8.0 0.5
Gain
Frequency
Chapter 4. Applying Effects to the Sound (Effects)
88
4