Owner`s manual

Radio Tuning
(Simulate a Radio Being Tuned)
This effect simulates the sound of a radio being tuned.
fig.4-36
Radio Detune [CTRL 1]
Specifies the frequency being tuned.
Range: 0Ð127
By rotating the [CTRL 1] knob in real time, you can
make the effect appear more real.
Noise Level [CTRL 3]
Specifies the volume of the tuning noise.
Range: 0Ð127
Low Gain
Adjusts the boost or cut of the low frequency range.
Range: -15Ð+15
High Gain [CTRL 2]
Adjusts the boost or cut of the high frequency range.
Range: -15Ð+15
Output
Specifies how the sound will be output.
Range: MONO, STEREO
With a setting of ÒMONO,Ó the output will be monau-
ral.
Output Level [EFX OUTPUT LEVEL]
Specifies the output volume of the Radio Tuning
effect.
Range: 0Ð127
Phonograph
(Simulates an Old Record)
This effect mutes the tone and adds disc noise to simu-
late the sound of music played on an old record player.
fig.4-37-0
Disc Type
Determines the type of disc noise.
Available Settings:
LP: 33 RPM record
EP: 45 RPM record
SP: 78 RPM record
D NoiseLevel (Disc Noise Level) [CTRL 3]
Specifies the volume of the disc noise.
Range: 0Ð127
Depth [CTRL 1]
Adjusts the tone.
Range: 0Ð+20
As this value is increased, the high range and low
range will be cut, and the mid range will be empha-
sized.
Output Pan [CTRL 2]
Specifies the stereo location of the output from the
Phonograph effect.
Range: L64Ð63R
Output Level [EFX OUTPUT LEVEL]
Specifies the output volume from the Phonograph
effect.
Range: 0Ð127
PHONOGRAPH
Depth
Output Pan
D Noise Level
Output Level
RADIO-TUNG
Radio Detune
High Gain
Noise Level
Output Level
Chapter 4. Applying Effects to the Sound (Effects)
92
4