User`s manual
26
Chapter 2 Printing
2-1 Preparing for Printing
Getting Started: Checking Print Workow
Preparing the MPX-90M machine
Switch on the power of the machine and select it as the output destination for the computer.
P. 27, "STEP 1: Switching On the Power," p. 28, "STEP 2: Specifying Output Destination for METAZAStudio"
Preparing an instrument to be imprinted
Check the several conditions for thickness, hardness, and the like that an instrument to be imprinted
needs to meet.
P. 28, "STEP 3: Preparing Instrument to be Imprinted"
Preparing print data
Create print data mainly using CSV les.
P. 30, "STEP 4: Preparing Print Data"
Starting printing
Set the instrument to be imprinted in the machine and output print data from METAZAStudio.
P. 35, "STEP 1: Loading the Instrument to be Imprinted" p. 43, "STEP 2: Making Prints"