User`s manual

32
2-1 Preparing for Printing
Chapter 2 Printing

Click [Object] > [Move to Center].
The center of the Variable eld moves to the center
of the work area.

Click .
The [Properties] dialog box appears.
If the Variable eld is not selected, you cannot click
. If you cannot click , click and then click
(select) the Variable eld.
This work is important, being related to the actual printing position.
In the machine, the center in printing operation is dened as the reference point in printing opera-
tion. The "center of the work area" in METAZAStudio coincides with the reference point in printing
operation. Consequently, making the "center of the Variable eld" coincide with the center of the
work area means making the "center of the Variable eld" coincide with the "reference point in actual
printing operation."
Though you can print without making the center of the [Variable Field] coincide with the "reference
point in printing operation, "making these points coincide with each other ensures the ease of placing
printed text and image at the desired location.