User`s manual

38
2-2 Starting Printing
Chapter 2 Printing

Raise the vise binder.
When raising or lowering the binder, be sure to hold its handle.

Place the instrument to be imprinted on the table of the vise and lower the binder.
Follow the instructions below and determine the position of the instrument.
 The area to be imprinted must be within the resin sheet on the table.
 The area to be imprinted must be 10 mm (0.39 in.) or more away from the outline of
the binder.
 The instrument must be secured in a manner that you cannot easily move it.
Binder
Handle