User`s manual
40
2-2 Starting Printing
Chapter 2 Printing
2.
Load the instrument to be imprinted on the table.
When using the vise, go to P. 37.
Set the table.
Place the table by aligning it with the frame on the unit. When the tabs on the bottom of the table t into
the holes on the unit, this completes setting of the table.
Afx the adhesive sheet for table to the
table.
Place the adhesive sheet straight inside the table
frame by aligning it with the scale marks. Be careful
not to allow any air bubbles to form between the
table and adhesive sheet.
Press the laser pointer button.
The laser pointer is irradiated.
If the machine is idle for 5 minutes, the laser pointer
is automatically turned o.
If the adhesive force has been educed, then
wash the adhesive sheet.
☞ P. 48, "Cleaning the Adhesive Sheet"
Never rub the surface with force. Doing so
may damage the surface and reduce its
adhesive strength.
Table
Adhesive sheet for table
Table
Laser pointer button