User`s manual
44
2-2 Starting Printing
Chapter 2 Printing
Set and conrm the preferences below.
P r i n t e r
name
Roland MPX-90M
P r i n t i n g
range
To restrict records (individual data included in a set of data used in Variable Printing)
to be printed, specify the record (page) that you wish to print. For example, if you print
the records of 2nd to 5th only, select [Pages] and specify the "2nd" to "5th" pages.
Copies
If you imprint the same instrument at multiple locations, specify multiple number of
copies. For example, if you wish to print on the front and back sides of the instrument,
specify "2" as the number of copies.
Material
Select the material of the instrument to be imprinted and specify your priority on
printing quality (priority of quality or speed). The selection you make when you cre-
ate new print data is reected in the material setting. You can change the setting to
print. The setting here takes priority over the setting in the METAZA driver.
Click [OK].
Printing starts.
When you print multiple pages or multiple cop-
ies, the message shown in the gure appears after
printing starts.
Wait until printing is nished, and then go on to the
next step.
When printing is nished, replace the instrument (material) to be printed or change
its orientation.
P. 35, "STEP 1: Loading the Instrument to be Imprinted"
Make sure to align the position using the laser pointer button.