User`s manual

Chapter 3 Maintenance and Adjustment

3-2 Adjustment

Adjusting the Striking Force of the Pin

You can adjust the striking force of the pin by using MPX-90M Head Manager. Pin adjustment involves striking

the pattern shown in the gure. Prepare a piece of test-use printing material (brass) or other material measur-

ing about 60 mm (2.3 in.) by 60 mm (2.3 in.).

Procedure



Start MPX-90M Head Manager.

 P. 22, "How to Start The Software"



Switch on the power to the machine.

 P. 27, "STEP1: Switching On the Power"



Click [Readjust Pin].

Follow the on-screen instructions to perform adjust-

ment for the pin.

 Set a material to be imprinted with a test pattern

using the adhesive sheet and table.

 Use a head cap.

 P. 35, "STEP 1: Loading the Instrument to be Im-

printed"

If the adjustment pattern fails to be printed, see the

sections given below.

 P. 67, "The printed location isn't where desired"



When you have nished, click

The window closes.

Adjustment pattern