User`s manual

60
4-1 More Advanced Operations
Chapter 4 Appendix

Enter a name for the composition you’re
registering.
Enter [Speed/Impact]
The printing results vary according to the hardness
of the material. Adjust to match the material.
 METAZA Driver online help ("[Correction] tab" > "[Details]
dialog box")
Impact--MIN
You can set the minimum value of print impact for an image. Raise the
value when dark areas of the image are not struck.
Lower the value when dark areas of the image are whitish or when overall
striking is too forceful.
Impact--MAX
You can set the maximum value of print impact for an image. Raise the
value when bright areas of the image are struck with too little force or
when overall striking is too weak. Lower the value when bright areas of
the image are struck with too much force.
Vector Impact
You can set the maximum value of print impact for a line.
Select [Advance].
[Advance] is available only when [Other] is selected in in step

.
 METAZA Driver online help ("[Correction] tab" > "[Details] dialog box")
OutputResolution
You can specify the number of dots per inch. As the number of the points
becomes larger, the image will become more precise.
Drafting
If you select "ON", you can skip image information in increments of one
dot.
Click [OK].
[Advance] dialogue close.
Changing Basic Settings of METAZA Driver
Procedure

Windows 7
From [Start] menu ( ), click [Control Panel] → [Hardware and Sound] → [Devices
and Printers].
Windows Vista
From [Start] menu ( ), click [Control Panel] → [Hardware and Sound] → [Printers].
Windows XP
From [Start] menu
, click [Control Panel] → [Printers and Other Hardware] → [Print-
ers and Faxes].