User`s manual

When you remove the media, depress the Release Lever to have the Feeder to make media free.
You do not need to return the Release Lever manually. When you close the Front Cover, the Release Lever
goes back to normal position.
+ Cut the front edgr of the media very straight along
the Cutter Guide.
+ Insert the media into the feeder to its limit(media
cannot go through the feeder).
+ Depress the "ready/insert" key to feed the media to
printing position.
+ Put the Media Cover over the roll and Media Base.
Align the rear edge of the Media Cover to be caught
by Media Base.
Downloaded From ManualsPrinter.com Manuals