Owner`s manual

Roland Drums & Percussion Resource Guide
39
Reinitializing the RMP-5
➜ Start with the power off.
➜ While holding down the
[Start/Stop] button (A), power up the RMP-5.
➜ The display will read "rSt."
➜ Release the [Start/Stop] button.
➜ Press and hold the [Start/Stop] button 1-2 seconds, or
until the display ashes.
➜ Release the [Start/Stop] button
Reinitializing the RMP-12
Legacy Reinitialization Guides
A
B
➜ Press the [Setup] (A) button
➜ Press [F4] (B) four 4x.
Remember, [Setup],
then [F4] 4x
Reinitializing the TD-10
➜ Hold down the [BEAT] button (A) for a while.
The SYSTEM icon will blink in the display.
➜ Turn the select knob to choose “Reset...,” and
then press the select knob (B). The display will
ask “Sure?”
➜ Turn the select knob (B) to choose “YES,”
and then press the select knob (B).
B
A