User`s manual

18
WIDTH LENGTH
14612 ------
REPLOT
START CLEAR
AXIS ROTATION
<0deg> 90deg
AREA LENGTH
MOVE < 1.0m>
1 CUT
50cm/s
0.250mm
30gf
AREA AXIS
REPLOT SUBMENU
1— 8
0—1.000
(in increments of
0.025 mm)
1—85
(in increments of 1 cm/s)
1—85 (in increments of 1 cm/s)
NORMAL/HEAVY/ H-SPEED
20—350
(in increments of 10 gf)
MENU
AREA
AXIS
REPLOT
-24.9 m—+24.9 m (in increments of 0.1 m.)
* When [FEET] is selected for [AREAUNIT] : -82.17—+82.17 (in increments of 0.33 feet)
0deg / 90deg
START/CLEAR
ENTER
Top menu
Align the blinking cursor at the value, press or to change the value, then press to confirm.
After making the setting for [LENGTH], press or to move the blinking cursor to [MOVE] and press
ENTER
MENU
MENU
to feed the sheet at the set length.
.
ENGLISH JAPANESE
GERMAN FRENCH
DEMO CUT
SELECT SHEET
ROLL EDGE PIECE
PNC-1860
Roland DG Corp.
PRESS SETUP KEY
LOADING SHEET
ROLL
Power on
+ Power on
+ Power on
Openning message
After loading a sheet,
close the front cover.
ROLL/EDGE/PIECE
ENTER
Press
MENU
SETUP
to select.
Use
or
MENU
to select.
Use
or
ENTER
to enable the setting.
Press
ENGLISH/JAPANESE/
GERMAN/FRENCH/
SPANISH/ITALIAN
SPANISH ITALIAN
PNC-1410
Roland DG Corp.
PNC-1210
Roland DG Corp.
UP 50cm/s NORMAL
CROPMARK SETTING
FAILED,SET AGAIN
CROPMARK
SETTING
COMPLETED!
ALIGNPOINT->ENTER
0 0
BASEPOINT->ENTER
0 0
CROP-MARK
7 DISPLAY MENUS FLOWCHART
For details about each of the menus, see the "8 Display Menu Lists."