User Manual-Reference Guide

13
Recording
Recalling Settings for Specic Purposes
The R-07 provides settings that are suitable for various recording situations. These settings are called “scenes.”
1. Press [SCENE] to access the “Scene” screen, and use [ ]/[ ] to change the Scene setting.
Scene Explanation Sample Rate Rec Mode Limiter Low Cut Input Level
OFF Choose this if you want to make settings manually.
Music HiRes
Settings appropriate for high-quality recording of
a band performance that’s not high-volume, or of
an acoustic instrumental performance.
96 kHz WAV-24 bit ON OFF 60
Music CD Settings for CD-quality recording. 44.1 kHz WAV-16 bit ON OFF 60
Music Long Settings for extended-duration recording. 44.1 kHz MP3-192 kbps ON OFF 60
Loud Live
Settings appropriate for high-volume
performances such as in a club.
44.1 kHz WAV-24 bit OFF OFF 25
Loud Practice
Settings appropriate for extended-duration
recording at high volume, such as in a practice
studio.
44.1 kHz MP3-192 kbps OFF OFF 25
Instrument
Settings appropriate for recording a nearby
instrument.
44.1 kHz WAV-24 bit ON OFF 60
Vocal Settings appropriate for recording a nearby vocal. 44.1 kHz WAV-24 bit ON 100 Hz 60
Voice Memo
Settings appropriate for non-musical recording,
such as a conference, lecture, or speech.
44.1 kHz MP3-128 kbps AGC 200 Hz AUTO
Field
Settings appropriate for recording the sounds of
nature, such as birdcalls or the murmuring sound
of a river.
96 kHz WAV-24 bit ON 100 Hz 80
Even after selecting a scene, you can edit the Sample Rate (p. 14), Rec Mode (p. 14), Limiter (p. 16), Low Cut (p. 16), and Input Level (p. 17)
values.
Saving an Edited Scene
Here’s how to save a scene that you’ve edited.
Scenes other than “OFF” can be saved.
1. Press [SCENE] to access the “Scene” screen.
2. Use [ ]/[ ] to select “Store Scene” and then
press [ ].
3. When the conrmation screen appears, use [ ] to
select “Yes” and then press [ ].
Initializing an Edited Scene
After you’ve edited a scene, here’s how to initialize it to the
original settings.
Scenes other than “OFF” can be initialized.
1. Press [SCENE] to access the “Scene” screen.
2. Use [ ]/[ ] to select “Initialize Scene” and then
press [ ].
3. When the conrmation screen appears, use [ ] to
select “Yes” and then press [ ].