User Manual-Reference Guide

28
Using the Metronome
Using the Metronome by Itself
You can listen to the metronome via the preview monitor or
through headphones while you practice your instrument.
1. Press [MENU] to access the “Menu” screen, use
[
]/[ ] to select “Metronome,” and then
press [
].
2. Use [ ]/[ ] to adjust the BPM (tempo), and use
[
]/[ ] to specify the BEAT (the number of beats
in each measure).
(Default in bold)
BEAT 0–4–8
BPM 30–120–250
3. Press [ ] to sound the metronome.
Press it again to stop.
If headphones are connected, no sound will be output from the
built-in speaker.
4. Use VOL [+] [–] to adjust the metronome’s volume.
Sounding the Metronome During
Recording
You can listen to the metronome through headphones when in
recording-standby mode and during recording.
The metronome will not be sounded from the built-in speaker
during recording.
1. Press [MENU] to access the “Menu” screen, use
[ ]/[ ] to select “Recorder,” and then press [ ].
2. Use [ ]/[ ] to move the cursor to Metronome
Lev setting, and use [ ]/[ ] to change the
setting.
(Default in bold)
Metronome Lev OFF, 1–10
Specify “OFF” if you don’t want to use the metronome.